|
Two categories of electrical machines are available in ATPDraw: Synchronous Machines and Universal Machines. ATPDraw does not support machines in parallel or back-to –back.
|
The Synchronous Machine models in ATPDraw have the following features/limitations:
· With and without TACS control.
· Manufacturers data.
· No saturation.
· No eddy-current or damping coils.
· Single mass.
The Universal Machine models in ATPDraw have the following features/limitations:
· Manual and automatic initialization.
· SM, IM and DC type supported.
· Raw coil data (internal parameters). Manufacturers data in Windsyn.
· Saturation is supported in d, q, or both axes.
· Maximum five excitation coils, sum d and q axis.
· Network option for mechanical torque only.
· Single torque source.
The Component dialog of Universal Machines is significantly different than that of the other objects. A complete description of parameters in this dialog box is given in chapter 5.2.2 of the Advanced Manual. The WI (embedded WIndSyn by Gabor Furst) components support the following machine types; Synchronous machines with salient or round rotor with damping options. Induction machines with wound, single cage, double cage, or deep-bar rotors. The Windsyn component is documented it chapter 5.2.5 in the Advanced Manual.
The popup menu under Machines contains the following items:
Selection |
Object name |
Icon |
ATP card |
Description |
SM 59/59 + No control |
SM |
|
MACHINE type 59 or 58 |
Synchronous machine. Max 5 TACS outputs. 3-phase armature. |
IM 56 |
IM56A |
|
MACHINE Type 56 |
Induction machine with multiple controls. 3-phase armature. |
Induction WI |
UMIND
|
|
UM-MACHINE Type 3, 4 |
Universal machine with manufacturers data input. |
Synchronous WI |
UMSYN |
|
UM-MACHINE Type 1 |
Universal machine with manufacturers data input. |
UM1 Synchronous |
UM_1 |
|
UM-MACHINE type 1 |
Synchronous. Set initialization under ATP | Settings/Switch/UM. |
UM3 Induction |
UM_3 |
|
UM-MACHINE type 3 |
Induction. Set initialization under ATP | Settings/Switch/UM. |
UM4 Induction |
UM_4 |
|
UM-MACHINE type 4 |
Induction. Set initialization under ATP | Settings/Switch/UM. |
UM6 Single phase |
UM_6 |
|
UM-MACHINE type 6 |
Single phase. Set initialization under ATP | Settings/Switch/UM. |
UM8 DC |
UM_8 |
|
UM-MACHINE type 8 |
DC machine. Set initialization under ATP | Settings/Switch/UM. |
